Inspection of lifeboat retraction and release devices

Time:

2023-02-27 15:49:04.704

① The davit and winch must be approved by the ship inspection for marine use The lifeboat should be able to smoothly turn outward The davit and its accessories must not have obvious damage, deformation, severe corrosion, etc The power recovery lifeboat must be equipped with a limit switch on the davit, and the limit switch should be able to cut off the power supply of the winch before resetting. ⑤ The davit hook component and its base should be of the fast unhooking type and should not have cracks, severe corrosion, etc At least 2 lifelines with a length of up to the waterline height when unloaded should be installed on the transverse tension rope of the boat davit. ⑦ The operating handle of the winch brake should have sufficient strength. ⑧ The two cable ends of the suspended boat steel rope should be turned back to each other for a period of no more than 30 months; If there is twisting or deterioration of the boat sling, or if the interval reaches 5 years (whichever is earlier), it should be replaced; The steel rope pulley and its base of the suspended boat must not be stuck or severely corroded.

General Construction of Livable Liferafts

The main types of ship life-saving equipment

General Construction of Livable Liferafts

The main types of ship life-saving equipment